Automatic Power Factor Control Panel/Energy Saving Device

Servomax Automatic Power Factor Controller Panel ensures optimum power  for the running load thereby:

Avoidance of power factor penalty

Reduction in Maximum demand (KVA)

Reduction in energy (KWH) consumption

Claim higher power factor incentives.

Longer life of the existing elecrical distribution components like transformer,switchgear,cables,etc.

The present day electrical networks cater to variety of non linear loads ( like UPS, soft starter, VFD etc) which dynamically fluctuatesand creates waveform distortion and harmonics thereby necessitating installation of APFC Panel with line filters.

The above facts warrant the consumer to install an ideal AUTOMATIC POWER FACTOR CORRECTION SYSTEM in order to :

Optimize the connected load for improved plant load factor.

Avoid manual disruption.

Avoid high current consumption losses.

Improvement in voltage regulation.

Achieve reduction in maximum demand KVA, thus avoiding penalty and demand charges.

Servomax APFC Panels:

has wide range: with 6 stage, 8 stage,14 stage controllers.

Servomax APFC Panels :

are available in the range of 20 KVAr to 1000KVAr.

Servomax APFC Panels:

have inb uilt surge suppression network for each switch to suppress the dangerous surges generated while operating power factor correction.

Wide ranges of automatic Powe factor corection panels are available in single module. Multi module constructions are available for higher ratings.

We also undertake manufacturing of any custom built panels.